Complete the steps
Step 1: Install Chain Rings
Install the two chain rings using four chain ring bolts.
The ZPIDER is designed for 110mm BCD Shimano-style 4-bolt dual chain rings which is a common standard in the bike industry for high end road bikes.
Tighten all four bolts firmly. It’s recommended to tighten the bolts in two rounds.
Note: We have chain rings available in the webshop that fits nicely with the ZPIDER.
Step 2: Install on the Bike
To help install the ZPIDER on the bike, the following instructional videos (on YouTube) are available to help you:
- Installation on PF30 frame
- Installation on BB30 frame
- Installation on BSA frame
- Installation on BB386EVO frame
Note: We have bottom brackets, spacers etc. available in the webshop.
For more details see the full user manual.
Step 3: Exit Flight Mode
Connect the little magnetic charging pod to a standard Micro USB phone charger cable and snap it onto the charging port on the power meter. Observe the light change from green to red.
Let it charge for at least 5 seconds. This will get the power meter out of flight mode (the power meter ships in flight mode).
If you have the patience, wait for the light to turn green again signaling the battery is fully charged.