Carbon MTB power meter
The ÿding MTB power meter offers the ultimate performance to handle the toughest trails, sections and weather conditions. Everything from the new strain gauge design, the protected measurement circuit, and improved software algorithms is designed for MTB. And we all know MTB means crazy vibrations, bumps, jumps and drops. Road power meters would “spike” in those conditions – not so with the power meter.
It is based on a superlight carbon crankset designed by one of the major OEM (private label) manufacturers: Samox. Its hollow carbon construction weighting only 450g makes it our lightest and stiffest ever. Direct-mount chainring compatibility allows you to seamlessly change chainrings if your bike, discipline, or ability change.
Pacing yourself while climbing? Tracking your training? Charting progress? Get tangible proof of your bodys power output and capability. With built-in ANT+ and Bluetooth the power meter is compatible with all head units and apps.
Retail €599.00 incl 25% VAT
Power, Cadence, Torque Effectiveness, Pedal Smoothness (L)
450g + chainring
Sensors, electronics, and battery well protected in the spindle. IP67 rating.
A single charge enables 250+ hours of riding. Use a standard micro-USB phone charger.
BLE / ANT+
Compatible all head units and apps. Use it with head units or sports watches from Garmin, Wahoo, Cateye, Polar, Lezyne, Bryton etc. and with your favorite smartphone apps like TeamZWATT, Strava, Zwift, Trainer Road, Sufferfest you name it!
Uses SRAM-style “direct mount”. Supplied with a single narrow-wide chainring 30/32/34t Boost or Non-Boost full CNC, black anodized.
Hollow carbon crank arms. 30mm alloy spindle. 2-piece. Integrated extractor bolt for easy mount/unmount of right crank arm (use 8mm hex key).
Secure wireless firmware update through app (Android, iOS)
Inner bolt, right side (8mm hex): 40-45 Nm
Outer bolt, right side (10mm hex): 35-40 Nm
Pedal: 30-35 Nm
Micro USB charge port allows charging using commonly available phone chargers, power banks etc.
Direct-mount chainring interface allows switching of chain rings with 3 bolts. A large selection of single and dual chainrings are readily available. Install a direct-mount spider to use 4/5-bolt chainrings.
Plastic tool included to make tightening and untightning the cap easier.
Selection of crank arm lengths 170/175mm to fit rider style and size.
Integrated extraction bolt allows the rider to remove and install the right crank arm with an 8mm hex key to switch chain rings.
Removing the cap
Charging / Exit flight mode / Reset
Installing the chainring
(tighten bolts to about 12Nm)
Installing the right side crank arm
(tighten bolt to about 40Nm)
Removing the right side crank arm
Calibrating the power meter (Android)
(iOS app is similar)
Updating the firmware (Android)
(iOS app is similar)